Electronics For Imaging Pi6500 Pro Uživatelský manuál stáhnout pdf (Strana 43)

7823

TAUS0607916EN00

Solution ID

Solution Usage

Description

What protocols are supported by the network interface cards (Token Ring NIC is optional).

Solution

The network protocols supported are Token Ring, TCP/IP, IPX/SPX, and AppleTalk.

TAUS0609087EN00

Solution ID

Solution Usage

Description

How to transport the 7823.

Solution

Problems may result if the model 7823 is not properly repacked after being set up. To ensure that the copier is installed successfully, the repacking procedure

must be followed when it is necessary to transport the machine after setup. The following precautions should be observed when transporting the 7823. To

transport the 7823, perform the following:

1. Keep all packing materials for reuse, especially the scanner locking pin and cushion holding plate under the transfer drum.

2. To prevent fusing unit oil leakage, the fusing unit unit must be empty, or removed and transported separately. When setting up the machine in the shop,

add only the amount of oil needed to run enough copies to ensure copy quality and proper machine operation. This can be accomplished by priming the fusing

unit. Fill the syringe with 10ml of silicon oil 3 times and inject it into the fusing unit's oil tank. The 30ml can make up to 20, 8.5x11 copies. Using this as a

guide, add the appropriate Amount of oil to the fusing unit. If the fusing unit oil tank is full, and transportation is required, use the syringe to remove the oil and

place it in an empty oil bottle.

3. The toner hopper must be empty, or removed and transported separately before the copier is shipped to prevent the toner from packing and binding the

drive train. If the copier was shipped with toner, the toner must be stirred before operating the machine to ensure that drive gears or boards will not be

damaged because of packed toner.

4. Certain adjustments will also need to be confirmed or reset (i.e., transfer drum retraction, fusing unit NIP adjustment, gradation).

5. Follow the installation site requirements included with the machine.

6. Remove the LCT unit before transporting the copier.

7. The developer unit must be removed and transported separately before the copier is shipped in order to prevent packing of the developer. If acceptable

print quality cannot be attained after transportation, all four developers will need to be changed.

8. Perform the Repacking Procedure outlined in 7823 Technical Bulletin #1 .

TAUS0609187EN00

Solution ID

Solution Usage

Description

Latest firmware (EPROM) for the 7823.

Solution

The latest firmware version is #841, available as part number 7823FC-14.0. This is the initial release of firmware for the 7823.

Upgrading the main body firmware requires a SCM PC Card Reader (with software) and a PC Flash Card. The information for each is as follows:

PC CARD READER

Manufacturer: SCM Microsystems

Distributor: Distribution Management Inc. (DMI)

520 N. Washington St. Suite 100

Falls Church, VA. 22046

Phone (703) 536-5300

Fax (703) 536-8609

Model: SB1-D2P

Description: Internal, Dual Slot, Front Access PC Card Reader.

Retail Price: $149.00 + Shipping and handling

Features:

* Exchange data and programs between your mobile, desktop. and industrial application.

* Plug and Play certified by Microsoft for Windows 95 and Windows NT 4.0.

* Easy installation, no driver diskettes or external power supply required.

* Optional SawpFTL Windows 95 or Windows NT 4.0 software driver provides floppy and hard disk emulation for a wide variety of linear flash cards (Intel,

AMD, etc.). Available only by SCM Technical Support.

* Does not require an IRQ under Windows 95.

* 16-bit ISA interface.

* Supports (1) Type II and (1) Type III or (2) Type II PC Cards.

October 2006

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

Komentáře k této Příručce

Žádné komentáře

Electronics For Imaging Pi6500 Pro Uživatelský manuál Strana 43

Komentáře k této Příručce

Související produkty a manuály pro Tiskové servery Electronics For Imaging Pi6500 Pro