
7823
*[Trademark ownership information]
TAUS0608867EN00
Solution ID
1
Solution Usage
Description
Fiery* X2e, how to display installed memory.
Solution
Installed memory can be displayed by powering the printer OFF/ON. As the printer performs the START SELF-TEST it will display the amount of installed
memory.
The installed memory is also listed on the configuration page. To print a configuration page, perform the following:
1. On the Fiery control panel press the MENU key one time. PRINT PAGES will be displayed.
2. Press ON LINE/ENTER.
3. Use the up or down scroll arrows until CONFIGURATION is displayed.
4. Press ON LINE/ENTER.
5. A Fiery configuration page will be printed. Installed memory will be displayed under Installed Options.
TAUS0608899EN00
Solution ID
1
Solution Usage
Description
Is the European 7723 the same model as the USA 7823?
Solution
The 7723 is not compatible to the Konica USA 7823 connectivity.
TAUS0608936EN00
Solution ID
1
Solution Usage
Description
Jamming or wrinkling as second side copies separate from the transfer drum.
Solution
CAUSE: The paper quality is poor. Excessive curl or too much fuser oil absorbed by the paper can cause this problem.
SOLUTION: Use a higher quality of paper such as paper designated for laser printers.
TAUS0609052EN00
Solution ID
1
Solution Usage
Description
What is the part number for the color separation guide/gray scale strip?
Solution
The part number for the color separation guide/gray scale strip is 10012662.
TAUS0609231EN00
Solution ID
1
Solution Usage
Description
Does Konica train customers on the use of the equipment?
Solution
Konica Branches has CSR (Customer Service Representative) personnel to train customers on all of Konica's equipment.
TAUS0609311EN00
Solution ID
1
Solution Usage
Description
28
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.
October 2006
Komentáře k této Příručce